Skip to main content

Double bearing unit for groove A8 D14 eccentric

1
1

Bearing units are installed in combination with a vertical aluminium profile as a guide plate. The eccentric and centric units differ in the design of the bolts. By using eccentric bolts, a clearance-free guide can be produced by subsequent adjustment. The bearing units should therefore always be installed in pairs in centric and eccentric versions. It is also essential to fit a wiper and lubrication system.

Article details

  • Article number

    1010112 / DOP14E

  • Steel, galvanised

  • m = 880 g/pc.

  • 2x bolt 8 D14 e (eccentric)

  • 2x track roller D14

  • 2x half-round screw ISO 7380 - M8×16 St galvanised

  • 2x washer DIN 125-8,4 St galvanised

0.0.294.28
Back to the overview
Download CAD data